RS232: After programming-in the door during the initialisation phase, click on the button "(Neue Türadresse) New Door Address". Check the jumpers on the PC adapter. LON: In the PC communications...
The TL-S5 does not offer this function.
The inputs must be live. The opto-couplers operate at a voltage of 5-30 V DC.
A DCW component has been disabled or an address has been changed. Disconnect the power, hold the red pushbutton down, reinstate the power and release the pushbutton.
a) The locking time has expired and the door is still open or is otherwise unable to lock. Or b) The lock is active but the red feedback signal wire (terminal 4) has been interrupted => check...
The know-how that guarantees our mutual success
Welcome to the KOLONDOOR FAQ zone
Here you will find the questions most frequently asked in relation to DORMA products. Click your way through – perhaps your question has already been dealt with.
f you should have questions on products that are not listed here, you can either simply talk to us personally or send us an email to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
